Fujitsu Printer FTP628 MCL383 User Manual

BATTERY DRIVE, FTP-608 Series  
2” HIGH SPEED THERMAL PRINTER WITH CUTTER  
FTP628 MCL383, Easy Loading Method (ELM)  
OVERVIEW  
The easy loading FTP-608 MCL Series is ultra compact high  
speed, battery driven thermal printer, printing on 2-inch wide  
paper (58mm) where platens are removable. Our original  
platen removal mechanism improved paper loading and  
maintenance.  
The FTP-608 MCL series can be used for a variety of  
applications, such as portable terminals, POS, ticket issuing  
terminals, label printers, banking terminals, and  
measurement and medical equipment.  
HIGHLIGHTS  
• Easy loading type  
Our unique platen removal mechanism improved paper  
loading and maintenance. Easy to remove paper jam.  
• Ultra compact  
Height 33.0 mm, width 87.6 mm, depth 66.3 mm for the 2  
inch model.  
• Multi-Function Diecast Frame  
Functions as heat sink for motor and high antistatic  
resistance to ESD, and high shock and vibration  
resistance.  
• High speed printing  
It can print at 80 mm/s (640 dotlines/s) maximum by using  
Fujitsu's unique head drive control.  
• High resolution printing  
8 dots/mm of resolution printing is possible.  
1
 
FTP-628MCL383  
SPECIFICATIONS  
Specification  
Item  
FTP-638MCL383#01/ #02  
Interface  
Conforms to RS232C / Centronics  
4.2 VDC to 8.5 V, peak current 1.1A (2 inch), 2.4A (3 inch) Printing  
ratio: 12.5%, printing speed 50mm/sec.  
For print head  
Operating  
Voltage  
For motor  
For logic  
4.2 VDC to 8.5 V, 1 A maximum  
5 VDC ± 5%, 0.5 A maximum  
5 VDC ±5% 3 A maximum  
87.6 x 66.3.0 x 33 mm (WxDxH)  
Approximately 240g  
For Cutter  
External dimensions  
Weight  
Pulse resistance: 100 million pulses/dot (under our standard  
conditions). Abrasion resistance: paper traveling distance 50km  
(print ratio: 25% or less)  
Head life  
Cutter life  
500,000 cuts  
+5˚ C to +40˚ C (printing density assurance range, operation is  
possible at 0˚ C to +50˚ C)  
Operating temperature  
Operating  
environment  
Operating humidity  
Storage temperature  
Storage humidity  
20 to 85% RH (no condensation)  
-40˚ C to +70˚ C (paper not included)  
5 to 95% RH (no condensation)  
Head temperature  
detection  
Detected by thermistor  
Detection  
function  
Paper out/mark detection Detected by photo-interrupter  
High sensitive paper:  
TF50KS-E4 (Nippon Paper)  
TK50KS-E (Nippon Paper)  
PD150R (Oji Paper)  
Standard paper:  
FTP-020P0107 (58mm)  
FTP-030P0107 (80mm)  
TK60KS-F1 (Nippon Paper)  
FTP-020P0102 (58mm)  
FTP-030P0102 (80mm)  
PD170R (Oji Paper)  
Recommended thermal sensitive paper  
Medium life storage paper:  
Long life storage paper:  
AFP220VBB-1 (Mitsubishi Paper)  
PD160R-N (Oji Paper)  
AFP-235 (Mitsubishi Paper)  
TP50KJ-R (Nippon Paper)  
HA112AA (Nippon Paper)  
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)  
3
 
FTP-628MCL383  
FUNCTION  
Item  
Item  
1. Test print function  
2. Paper out detection  
3. Paper near end detection  
4. Platen open detect  
8.  
9.  
Cutter trouble detect  
Motor power saving function  
10. Mark detection function  
11. MCU operation abnormality detection  
Thermal head temperature abnormality  
detection  
5.  
12. Power ON/OFF sequence protection  
6. Blow-out fuse detection  
13. Motor over-current protection  
14. Hardware timer  
7. Head voltage abnormality detection  
DIMENSIONS  
Printer mechanism  
Outer dimension and installing position  
(1) external dimension  
Center of paper  
+0  
58 (paper width)  
-1  
N O A U C T I  
33.1  
48.0  
68.0  
87  
Unit: mm  
83.7  
4
 
FTP-628MCL383  
PRINTER CONNECTOR (FLEXIBLE PT BOARD) PIN ARRAYS  
FTP-628 MCL383  
Thermal head, control circuit side connector: 52610-3090 Molex or equivalent product  
No  
1
Signal  
I/O Contents  
PHK  
VSEN  
PHE  
SW1  
SW2  
VH  
I
Cathode for photo interruptor  
2
paper sensor power  
3
O
I
Emittor for photo interruptor  
Platen release switch  
Platen release switch  
4
5
I
6
I
Head drive power  
7
VH  
I
8
DIN  
I
Data in  
9
CLK  
I
Synchronous clock for communication  
10 GND  
11 GND  
12 STB6  
13 STB5  
14 STB4  
15 VDD  
16 TH  
I
Ground power supply for thermal head  
Thermal head energizing control signal  
I
I
I
Logic power  
O
O
I
Thermally sensitive resistor input termnial 1  
Thermally sensitive resistor input termnial 2  
17 TH  
18 STB3  
19 STB2  
20 STB1  
21 GND  
22 GND  
23 LAT  
24 DO  
I
Thermal head energizing control signal  
I
I
Ground power supply for thermal head  
Data latch  
Data out  
O
I
25 VH  
Power supply for thermal head  
26 VH  
I
27 MT/A  
28 MT/A  
29 MT/B  
30 MT/B  
I
I
Stepping motor excitation signal  
I
I
Do not plug or unplug the FPC when power is on.  
5
 
FTP-628MCL383  
Sensor (Photo-  
interruptor)  
Platen unit  
Thermal head  
Motor  
FPC  
Connect terminal:  
surface side  
Connector No  
30,29, .....................2,1  
(FPC pin numbers)  
Cutter (CN5)  
Connector on control circuit side: B4B-PH (J.S.T. or equivalent)  
No. Signal I/O  
Contents  
No. Signal I/O  
Contents  
Cutter position  
detect switch1  
Home position  
detect switch 2  
1
3
SW1  
M+  
I
2
4
SW2  
M-  
-
Stepping motor  
coil excitation M+  
Stepping motor  
coil excitation M-  
I/O  
I/O  
Europe  
Japan  
Fujitsu Components Europe B.V.  
Diamantlaan 25  
Fujitsu Component Limited  
Gotanda-Chuo Building  
2132 WV Hoofddorp  
Netherlands  
Tel: (31-23) 5560910  
Fax: (31-23) 5560950  
3-5, Higashigotanda 2-chome, Shinagawa-ku  
Tokyo 141, Japan  
Tel: (81-3) 5449-7010  
Fax: (81-3) 5449-2626  
Fujitsu Components  
International  
Headquarter  
Offices  
Asia Pacific  
North and South America  
Fujitsu Components America, Inc.  
250 E. Caribbean Drive  
Sunnyvale, CA 94089 U.S.A.  
Tel: (1-408) 745-4900  
Fujitsu Components Asia Ltd.  
102E Pasir Panjang Road  
#04-01 Citilink Warehouse Complex  
Singapore 118529  
Tel: (65) 6375-8560  
Fax: (1-408) 745-4970  
Fax: (65) 6273-3021  
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered  
trademarks of their respective owners. Rev. 02/27/2204.  
6
 

Electro Voice Microphone N D468 User Manual
Eureka Vacuum Cleaner 4770 series User Manual
Fender Car Amplifier P N 030780 User Manual
FoodSaver Food Saver V2222 User Manual
Gefen Switch GEF 3GSDI 16416 User Manual
GE Heat Pump AZ38H09E User Manual
Genesis Advanced Technologies Speaker Servo Subwoofer User Manual
GE Network Router EX2100 User Manual
GE Toaster 106701 User Manual
Gianni Industries Door LZ 350 Bracket User Manual