Infinity Speaker 10 Subwoofer User Manual

Te n 1 0 " S u b w o o f e r  
LIMITED WARRANTY  
THREE YEARS  
Beta Series Automotive Speakers, Electronics  
I N S T R U C T I O N S  
CAR AUDIO  
Thank you for purchasing an Infinity Beta Ten  
10" Subwoofer. You’ve selected a premium product  
that offers superior performance and advanced  
materials, resulting from over 25 years of loud-  
speaker design. This Infinity product is made with  
our ongoing dedication to create the best consumer  
audio products possible. As a result, you can expect  
your new Beta Subwoofer to provide you with many  
years of listening enjoyment.  
• Locate and note all fuel lines, hydraulic brake  
lines, and electrical wiring. Use extreme caution  
when cutting or drilling in and around these areas.  
HOW LONG IS THIS WARRANTY?  
This warranty remains in effect for three years from date of purchase.  
WHO IS PROTECTED BY THIS WARRANTY?  
• Check clearances on both sides of a planned  
mounting surface before drilling any holes or  
installing any screws.  
This warranty protects the original owner and is not transferable, providing that the product has been pur-  
chased in the United States. The original dated bill of sale from an authorized Infinity dealer must be present-  
ed whenever warranty service is required. For warranty service outside the United States, contact the Infinity  
distributor in the country where the product was purchased.  
THIELE-SMALL PARAMETERS  
We have included three enclosure types sealed,  
vented, and single-reflex bandpass with three dif-  
ferent alignments (i.e., tuning preferences) for each  
box. Please refer to the discussion in Subwoofer  
Enclosure Trade-Offs and associated performance  
graphs (on the inside pages) to select a desired  
enclosure type and alignment.  
FREE-AIR RESONANCE:  
FS (HZ  
)
3
24.00  
2.70  
77.00  
8.08  
0.20  
0.20  
0.39  
10.00  
2.80  
WHAT IS COVERED BY THIS WARRANTY?  
COMPLIANCE VOLUME:  
VAS (FT  
)
Except as specified below, this warranty covers all defects in materials and workmanship. The following are  
not covered: damage caused by accident, misuse, abuse, product modification or neglect, damage occurring  
during shipment, damage from failure to follow instructions contained in the instruction manual, damage  
resulting from the performance of repairs by someone not authorized by Infinity, or any claims based on mis-  
representations by the seller. This warranty does not cover incidental or consequential damages. It does not  
cover the cost of removing or reinstalling the unit.  
VAS (LITERS)  
QMS  
MECHANICAL Q:  
ELECTRICAL Q:  
TOTAL Q:  
QES  
QTS  
Each Infinity Beta Ten 10" Subwoofer is covered by  
our full three-year parts and labor warranty (see  
back page). Keep your original dated bill of sale in  
case warranty service is required.  
MAXIMUM EXCURSION:  
XMAX (IN)  
XMAX (MM)  
RE (OHMS)  
You are responsible for transporting your product for repair. However, Infinity will pay return charges if the  
repair is covered under warranty. Outside the United States, please contact your local distributor.  
VOICE COIL  
DC  
RESISTANCE:  
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.  
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on  
how long an implied warranty lasts, so the above may not apply to you.  
IMPORTANT: Installation of automotive stereo  
components can require extensive experience in  
dealing with a variety of electrical, and  
mechanical procedures, including subwoofer  
box building. Although these instructions  
explain how to install a Beta Subwoofer in a  
general sense, they do not show the exact instal-  
lation methods for your particular vehicle. If  
you do not have the experience, do not attempt  
the installation yourself; instead ask your  
Authorized Infinity Car Audio Dealer about  
professional installation options.  
SPECIFICATIONS  
DIAMETER:  
10" (254.0 MM)  
PLEASE MAKE NOTE OF THE FOLLOWING  
INFORMATION AND RETAIN FOR YOUR RECORDS:  
SENSITIVITY (2.83 V @ 1M): 93 dB  
POWER HANDLING:  
FREQUENCY RESPONSE:  
NOMINAL IMPEDANCE:  
DIMENSIONS:  
250 WRMS  
20 ~ 500 HZ  
Product Name: __________________________________ Model Number:_____________________________________  
Store Name And Phone: _______________________________________________________________________________  
Date of Purchase: _____________________________________________________________________________________  
4
OHMS  
mounting depth  
4.75" (120.65 mm)  
PRECAUTIONS  
• Always wear protective eyewear when using tools.  
cutout diameter  
9.37" (238.00 mm)  
• Turn off all audio systems and other electrical  
devices before starting the installation.  
outer diameter  
10.70" (271.78 mm)  
• Disconnect the (–) negative lead from your vehi-  
cle’s battery.  
Infinity Systems, Inc.  
Chatsworth, CA 91311, USA  
20630 Nordhoff Street  
Infinity Systems, Inc.  
Chatsworth, CA 91311, USA  
20630 Nordhoff Street  
VOICE (818) 407-0228 • FAX (818) 709-9486  
VOICE (818) 407-0228 • FAX (818) 709-9486  
®
®
 
Printed In Japan  

Insignia Digital Photo Frame NS DPF0712G User Manual
IRIS Indoor Furnishings E5AA20 User Manual
JVC CRT Television 0305MKH CR MU User Manual
JVC CRT Television C 13310 User Manual
JVC Universal Remote DR DX5SE User Manual
Karcher Pressure Washer G3200XH User Manual
Keating Of Chicago Fryer 004341 User Manual
Kenmore Ventilation Hood 31130 User Manual
Kodak Digital Camera Z712 IS User Manual
Kodak Printer KY0730482 User Manual